Bladder Foam Tank
The bladder foam tank comprises a foam liquid tank and a foam proportioner.it is a device for storing the foam liquid and mixing the foam liquid and water at a certain ratio.
Fujian Haijing Fire Fighting Equipment Co., Ltd. is one of the leading manufacturers and suppliers of bladder foam tank in China, also supports customized service. Please feel free to wholesale cheap bladder foam tank from our factory.
Products Description
product Introduction
The pressure type proportional mixing device is composed of foam liquid storage tank, rubber seal, pressure type proportional mixer, safety valve, control valve and corresponding supporting pipe fittings. It is applicable to foam liquid with 3% or 6% mixing ratio. This device is suitable for oil storage tank areas, chemical plants, fuel power plants, underground garages, hazardous material warehouses, and other places. It can also be used for liquid supply equipment of water spray foam combined system.
The bladder foam tank comprises a foam liquid tank and a foam proportioner.it is a device for storing the foam liquid and mixing the foam liquid and water at a certain ratio.
Core advantages of pressure type foam proportioning device
(1) High mixing accuracy and excellent fire extinguishing efficiency
Automatic proportional mixing: automatically adjust the mixing ratio of foam liquid and water through pressure difference to ensure constant extinguishing concentration.
Rapid response: no external power is needed, and the water pressure drive is used to form foam mixture instantly, which shortens the fire fighting preparation time.
(2) Strong system reliability
No electrical dependence: No need for power supply or complex control, suitable for flammable and explosive environments.
Anti interference: not affected by water pressure fluctuations, able to stably output even when the fire pump is started or stopped or the pipeline pressure changes.
(3) Easy installation and maintenance
Compact design: integrated foam tank, proportional mixer and control valve, small floor area.
Low maintenance cost: no moving parts, only regular inspection of foam liquid reserves and pipeline sealing.
(4) Outstanding economic performance
Save foam liquid: precise mixing reduces waste, and can save 10% -15% of foam liquid compared with the traditional negative pressure device.
Long life: Stainless steel or carbon steel anti-corrosion material, with a service life of over 15 years.
Feature:
| Capacity | 200L-5000L |
| Working pressure | 0.6-1.2Mpa |
| Strength & sealing test | 1.5MPa & 1.32MPa |
| Pressure loss | ≤0.2MPa(@Max. flow) |
| Mixing ratio | 3% or 6% |
Company Information
Q&A
Q: What are the installation requirements of foam tank?
A: Location: Close to the protection area and avoid direct sunlight (prevent high-temperature degradation of foam liquid). When installed indoors, the ambient temperature should be ≥ 5 ℃ (insulation or electric tracing is required in cold regions).
Contact Information
Send us your enquiry, we will reply In 24 Hours!
Pauline
WhatsApp/WeChat: +86-13332933886
Email: manager@sanjingfire.com
Hot Tags: bladder foam tank, China bladder foam tank manufacturers, suppliers, factory, AFFF Tank, Fire Foam Tank, Foam Bladder Tank, Foam Extinguishing, Vertical Bladder Tank
