Brass Pendent Foam Sprinkler Nozzle

Brass Pendent Foam Sprinkler Nozzle

Foam-water deluge systems are best for spaces with ignitable liquids.
The foam-water sprinklers discharge foam from overhead sprinklers then discharge water—similar to standard spray sprinklers.
This model has a unique venturi-style body that allows foam to form and release as effectively as possible. As the foam solution (a water-and-foam concentrate) flows through the inlet, air is drawn into the body of the unit.
The foam solution mixed with air is agitated to create an air-aspirated foam. Then, the foam is released in a predetermined discharge pattern.

Fujian Haijing Fire Fighting Equipment Co., Ltd. is one of the leading manufacturers and suppliers of brass pendent foam sprinkler nozzle in China, also supports customized service. Please feel free to wholesale cheap brass pendent foam sprinkler nozzle from our factory.

 

 

Technical Pameters of Brass Pendent Foam Sprinkler Nozzle

 

Material: Copper

Finishing: Natural Copper

Size: 1/2" NPT

Type: Pendent Mounting or Upright 

W.P.: 12Bar

K Factor: 60

 

Image Details of Brass Pendent Foam Sprinkler Nozzle

 

3U1

 

detailpacking

How long must a foam sprinkler system discharge continuously?

 

NFPA 16 requires a minimum 10-minute foam discharge at design density, followed by up to 60 minutes of water if cooling is still needed, ensuring both extinguishment and prevention of re-ignition

 

Company Information

 

haijing

Factory Introduction

ISO-2

 

Q&A

 

Q: Why are foam sprinklers spaced more closely than ordinary sprinklers?

A: NFPA 16 limits each head to 9.3 m² (100 ft²) and 3.7 m (12 ft) spacing to guarantee a continuous 6.5 mm/min (0.16 gpm/ft²) foam blanket over the whole hazard area, compensating for the lower density of foam compared with water .

 

Q: Can the same sprinkler discharge pure water later in an incident?

A: Yes-dual-agent heads accept plain water once the concentrate supply is exhausted, allowing extended cooling without switching hardware, a feature often programmed in deluge-type foam-water systems

 

Contact Information

 

Send us your enquiry, we will reply In 24 Hours!

WhatsApp/WeChat: +86 18359194029

E-mail: sales03@sanjingfire.com
Add: Maosheng RD., Fumao Economic Zone, Nan'an City, Fujian, China, 362300

 

 

Hot Tags: brass pendent foam sprinkler nozzle, China brass pendent foam sprinkler nozzle manufacturers, suppliers, factory, Foam Sprinkler, Foam Sprinkler Head, Foam Water Sprinkler, Water Foam Sprinkler

(0/10)

clearall