Deluge Alarm Valve Lever Type

Deluge Alarm Valve Lever Type

The Deluge Alarm Valve is a direct‑sealed diaphragm valve. It is mainly composed of the valve body, water alarm gong, pressure switch, anti‑reset device, automatic drip valve, solenoid valve, and connecting pipe fittings.
This valve is widely used in various types of open‑type fire protection systems, including automatic sprinkler systems (deluge systems), water curtain systems, and water mist systems.

Fujian Haijing Fire Fighting Equipment Co., Ltd. is one of the leading manufacturers and suppliers of deluge alarm valve lever type in China, also supports customized service. Please feel free to wholesale cheap deluge alarm valve lever type from our factory.

 

What Is a Deluge Alarm Valve (Lever Type)?

 

Lever-Operated Deluge Alarm Valve
Deluge Alarm Valve is mainly composed of the valve body,
water alarm gong, pressure switch, anti-reset device, automatic
drip valve, solenoid valve and connecting pipe fittings. It is a
direct sealed diaphragm valves, widely used in various types of
open systems such as automatic sprinkler system, water curtain
system, water mist system. Enjoying advantages of simplexes in
structure, reliance in performance, flexibility in installation and
convenience in maintenance.

Feature

Material                                                Ductile Cast Iron Body, Rubber Seal, Galvanized Accessory Pipe, Brass Accessory Valves
Nominal diameter                              DN80-DN250
Rated working pressure                   1.6MPa
Sealed test                                          3.2MPa
Strength test                                       6.4MPa
Use range                                            Deluge Sprinkler System
 

Product information

Deluge Alarm Valve-CAD
Size DN80 DN100 DN125 DN150 DN200 DN250
Starting Time (s) ≤15 ≤60
Friction Resistance ≤0.07
Height of Alarm Valve (mM) 330 350 430 500
Outside Diameter of Flange (mM) 200 220 250 285 340 405
Diameter Between Flange Screw Hole (mM) 160 180 210 240 295 355
Diameter of Flange Holes (mM) 8 12
Quantity of Screw Hole 18 22 26

 

 

 

How Does the Lever Type Work?

 

 

Diaphragm-operated Deluge Alarm Valve
Let me walk you through it.

Normal state (closed):
The valve is closed. A rubber diaphragm or seat seals against the body. A lever mechanism holds the sealing element in place. The lever is latched. It won't move until something releases it.

The FM200 or water is on the inlet side, under pressure. The outlet side is empty (for a dry pilot system) or also pressurized (for a wet pilot system). The lever holds everything tight.

Release signal:
Something triggers the valve. Options:

Solenoid valve – Electric signal from the fire panel. The solenoid opens a small pilot line. Pressure releases. The lever unlatches.

Pneumatic actuator – Gas pressure from a pilot detector. When the detector activates, it sends pressure to unlatch the lever.

Manual release – Someone pulls a cable or pushes a lever by hand. Mechanical override. No power needed.

Valve opens:
The lever releases. The sealing element is no longer held in place. Inlet pressure pushes it open. The valve opens fully – fast. In milliseconds.

Discharge:
FM200 or water rushes through the valve. It goes to the pipe network. Out of every nozzle in the system. All at once. The fire is flooded with agent.

Resetting:
After the fire is out and the system is depressurized, you open the valve. Remove the cover. Manually reset the lever mechanism. Close the valve. Repressurize the system. It's ready again.

That's the cycle. Simple. Mechanical. Reliable.

 

 

 

company information

 

haijing

 

FAQ

 

Q1: What's the difference between a deluge valve and a standard alarm check valve?

A standard alarm check valve holds water back in a wet pipe system. One sprinkler opens, the valve opens, water flows to that sprinkler. A deluge valve holds agent back from open nozzles. When it opens, every nozzle discharges at once – flooding the whole hazard area.

Q2: Why use a lever-type deluge valve instead of a diaphragm type?

Lever type is mechanically held closed. It doesn't rely on water pressure to stay shut. That means it works with gas systems like FM200 that have low pressure. It also opens faster – milliseconds instead of seconds. Diaphragm valves are fine for water. For clean agent, use lever type.

Contact Information

Send us your enquiry, we will reply In 24 Hours!
Siya Huang
WhatsApp/WeChat: +86 15102989485
E-mail: sales07@sajingfire.com
Add: Maosheng RD., Fumao Economic Zone, Nan'an City, Fujian, China, 362300

 

Product parameters

Hot Tags: deluge alarm valve lever type, China deluge alarm valve lever type manufacturers, suppliers, factory

(0/10)

clearall