Stainless Steel Monitorr – Water Type

Stainless Steel Monitorr – Water Type

Stainless steel water monitor – fixed or manual. Corrosion-resistant, long range, high flow. For offshore, chemical plants, marine environments.

Fujian Haijing Fire Fighting Equipment Co., Ltd. is one of the leading manufacturers and suppliers of stainless steel monitorr – water type in China, also supports customized service. Please feel free to wholesale cheap stainless steel monitorr – water type from our factory.

 

Products Description

 

It's a fire monitor made from stainless steel. Not aluminum. Not brass. Not coated carbon steel. Solid stainless – usually 304 or 316 grade.

What's a monitor? A big nozzle on a swivel base. You mount it on a deck, a platform, or a fire truck. You aim it by turning handwheels – left and right, up and down. Open a valve. Water shoots out in a straight stream or a wide fog pattern. Long range. High flow. No one holds it – it stays where you aim it.

This particular monitor is for water only. Not foam. No air-aspirating foam tip. Just clean, simple water. That doesn't mean it's weak. A stainless steel water monitor can throw 2,000, 3,000, even 5,000 liters per minute. That's enough water to fill a swimming pool in a few minutes. Enough to knock down a ship fire, a refinery fire, or a large warehouse fire.

The stainless steel body is the key feature. Ordinary monitors – aluminum or cast iron – rust or corrode in saltwater and chemical environments. This one doesn't. Offshore platforms. Ships. Coastal fire trucks. Chemical plants. That's where this monitor belongs.

 

Stainless Steel Monitor-SJ-18A

 

Stainless Steel Monitor-SJ-18A
Model
PS8/20W
PS8/30W
PS8/40W
PS10/50W
PS10/60W
Flow Rate
(L/S)
20
30
40
50
60
Rated W.P.(MPa)
0.8 0.8 0.8 1.0
W.P. Range (MPa )
0.5~1.6
Distance(m)
55 60 65 70 75
Angle Of Horizontal
Rotation(º)
360
Angle Of Vertical
Rotation(º)
-60~+70
Material
Stainless Steel 304
Installation Mode
DN100
Service Environment
-10℃~+50℃

tainless Steel Monitor-SJ-18-B

 

tainless Steel Monitor-SJ-18-B 1tainless Steel Monitor-SJ-18-B 2tainless Steel Monitor-SJ-18-B 3

Model
PS8/20W
PS8/30W
PS8/40W
PS10/50W
PS10/60W
PS10/80W
PS12/100W PS12/200W
Flow Rate (L/S)
20 30 40 50 60 80 100 120
Rated W.P. (MPa)
0.8 0.8 0.8 1.0 1.0 1.0 1.2 1.2
W.P. Range (MPa )
0.5~1.6
Distance(m)
55 60 65 70 75 85 90 110
Angle Of Horizontal
Rotation(º)
360
Angle Of Vertical
Rotation(º)
-60~+70
Material
Stainless Steel 304
Installation Mode
DN100 DN125 DN150
Service Environment
-10℃~+50℃
 

Why Stainless Steel?

 

Because some environments eat other metals.

Aluminum – Lightweight but not corrosion-proof. In salt air, aluminum pits and corrodes. The surface gets white powder. Paint helps, but if the paint chips, the corrosion starts. After a few years on an offshore platform, an aluminum monitor looks terrible.

Brass – Better than aluminum. But in saltwater, brass can dezincify – the zinc leaches out, leaving weak, spongy copper. Not good for high-pressure firefighting.

Cast iron / carbon steel – They rust. Plain and simple. Paint slows it down but doesn't stop it. In a marine environment, carbon steel needs constant repainting. On a ship or an oil rig, you don't have time for that.

Stainless steel – Contains chromium. The chromium forms a thin oxide layer on the surface. That layer is the corrosion protection. If it gets scratched, it reforms. No paint. No coating. No rust.

304 stainless is good for most marine and chemical environments. 316 stainless has added molybdenum – even better for saltwater and chlorides. We use 304 as standard. Upgrade to 316 for offshore or aggressive chemical service.

The tradeoff? Stainless steel is more expensive than aluminum or cast iron. But in a corrosive environment, a cheaper monitor fails in 3-5 years. A stainless monitor lasts 15-20 years. Over time, stainless is cheaper because you don't replace it as often.

 

Company Information

 

haijingFactory Introduction

 

FAQ

Q1: The handwheels are stiff or won't turn. What's wrong?

Old grease has hardened inside the gear housing, or the gears have rusted (though rust is unlikely with stainless steel). Remove the gear cover, clean out the old grease, and apply new marine-grade grease. If the handwheels are still stiff, the gear teeth may be damaged – you'll need to replace the gear assembly.

Q2: The water stream is weak – not reaching as far as it should. Why?

Low flow or low water pressure. First, check that the supply valve is fully open. Then check the pump discharge pressure – it should be at least 7 bar (100 PSI) at the monitor inlet. If pressure is good but flow is still weak, debris may be blocking the nozzle. Remove the nozzle tip and check for obstructions.

Q3: Water leaks from the base of the monitor. How do I fix it?

The base gasket is worn, or the mounting bolts are loose. Try tightening the bolts first – sometimes that's all it takes. If it still leaks, the gasket needs to be replaced. Remove the monitor, install a new gasket, and re-tighten the bolts to the correct torque.

 

Contact Us

 

Send us your enquiry, we will reply In 24 Hours!
Siya Huang
WhatsApp/WeChat: +86 15102989485
E-mail: sales07@sajingfire.com
Add: Maosheng RD., Fumao Economic Zone, Nan'an City, Fujian, China, 362300

 

Hot Tags: stainless steel monitorr – water type, China stainless steel monitorr – water type manufacturers, suppliers, factory, Fire Fighting Monitor, Fire Monitor, Fire Water Monitor, Ground Monitor Fire Fighting, Portable Fire Monitor

(0/10)

clearall